4140 vs 1018 steel injection mold materials

author: Universe plastic

2024-01-16

4140 vs 1018 are both common carbon steel materials, but their chemical composition and mechanical properties are different.

Comparison of 4140 vs 1018 steel materials

4140 is a medium carbon steel with a carbon content of approximately 0.37%, a silicon content of approximately 0.1%, a manganese content of approximately 0.1%, a phosphorus content of less than 0.03%, and a sulfur content of less than 0.15%. It also contains small amounts of alloying elements such as chromium, molybdenum and nickel to increase its strength and corrosion resistance.

1018 is a low carbon steel with a carbon concentration of approximately 0.12%, silicon content less than 0.25%, manganese content less than 0.6%, phosphorus content less than 0.04%, and sulfur content less than 0.15%. It also contains some other alloying elements, such as copper and chromium, to increase its hardness and strength. 1018 steel is commonly used to manufacture various mechanical parts, such as bearings, screws, nuts, pins and springs. Compared to 4140, 1018 is less strong and easier to process and shape.

4140 vs 1018 injection mold applications

4140 vs 1018 are both commonly used steels for injection molds, and their properties and uses are different.

4140 is a high-strength steel with high strength and toughness, suitable for injection molds that need to withstand large loads. It has higher hardness and can provide better wear resistance and durability, but it is relatively difficult to process and requires the use of higher processing equipment and technology.

1018 is a low carbon steel with lower strength and hardness, but is relatively easier to process and manufacture, so it is suitable for some simple injection molds. Its wear resistance and durability are relatively poor, but it is still widely used in some small, low-cost injection molds.

4140 vs 1018 steel material injection molding options

Which steel material to choose for 4140 vs 1018 to make injection molds depends on the specific requirements and usage conditions of the injection mold.

If higher strength, hardness and corrosion resistance are required, and sufficient processing capabilities are available, 4140 steel can be selected.

If you need simpler, processable and cost-effective injection molds, you can choose 1018 steel.

Customized 4140 vs 1018 steel injection mold

Are you looking for a factory that can customize 4140 or 1018 steel injection molds?

Universe Plastic Factory has more than 15 years of experience in manufacturing 4140 vs 1018 steel injection molds. If you need it, you can contact us at any time.

A Comprehensive Guide to Plastic Design

ABS and polypropylene injection molding materials